...
Select the Calculate All Angles button
Select the first part in the list and visually confirm that the correct shape has been chosen and the rotation is suitable (when comparing the overlay to the CAD shape) and either confirm it or correct it.
Advance through the list until all package types are confirmed.
...
Check and validate machine placement angles
Use the Machine Angle Correction Center options to check and validate correct all machine placement angles automatically or on a part-by-part basis. The Angle Resolution options are used with certain advanced machine types to validate or correct machine placement angles (theta) specific to that machine type:
...
Show Confirmed Shapes - Displays confirmed parts (Green).
Show Unconfirmed Shapes - Displays unconfirmed parts (Blue).
Advance on Confirm - Advances to the next part in the Part Number list when an item is confirmed.
Confirm All on Recalculate All - All parts will be confirmed automatically when you select Recalculate All.
Show Angles in Clockwise Convention - Displays angles using the Clockwise convention.
Show Negative (270 is -90) - Specifies that 270 degrees is equivalent to -90 degrees.
Validate all machine placement angles automatically
To check and validate all machine placement angles automatically, you use the buttons on the left side of the Machine Angle Correction Center:
...
| Info |
|---|
Important You must confirm all angles (they must all be Green). When you select Generate Program to create a machine program, any unconfirmed angles will be auto-calculated by FactoryLogix and those calculated angles are published to the machine program. |
Validate machine placement angles for selected parts
...
...
To check and validate machine placement angles on a part-by-part basis, select a part under Part Number in the Machine Angle Correction Center.
Step through each part number in the Part Number list (use the Previous and Next buttons) and confirm the rotations or adjust the angles and then confirm the angles.
Make any necessary changes, then select the Confirm
button for each part number.Use these buttons to help you confirm machine placement angle settings for a selected part in the Part Number list:
Note
The Apply angle change to affected features 
button (next to the Machine Angle field) references the Features Affected drop-down. When you change a machine placement angle for a selected part, you can use the drop-down to apply the angle change for all features (Select All check box) of the part or just those features whose check boxes are selected.
