Alternate Internal Part Numbers (Alternate IPNs) include capabilities in the following areas of FactoryLogix:
Defect creation (Production)
Capture materials activity (NPI)
Sub-Assembly activity (NPI)
BOM processing (NPI)
Defect creation
When you create a new defect in the Production client application, the Add Defect dialog gives you the option to collect the defect three ways: By Reference, By Part Number, or By Assembly. When you select By Reference or By Part Number, an additional Alternate Part Number drop-down displays.
...
Defect collection method | Description |
|---|---|
By Reference | When you select By Reference, a drop-down list of all locations on the BOM (Bill Of Material) is shown. When you select OK, a single defect is recorded against the identified location within the unit. Alternate part number options When you select By Reference, an Alternate Part Number drop-down showing all alternate part numbers for that location is shown. Alternate part numbers are determined as follows:
|
Note |
| |
By Part Number | When you select By Part Number, a drop-down list of all primary part numbers in the BOM (Bill Of Material) is shown. When you select OK in the dialog, a separate defect is recorded against each location within the unit where that part number is identified in the BOM as the primary part number. Alternate part number options When you select By Part Number, an Alternate Part Number drop-down showing all alternate part numbers for that part number is shown. Alternate part numbers are determined as follows:
|
Note |
See FactoryLogix global options for more information about changing global settings. |
Note |
This solution assumes that in the situation where a part number is defined on more than one BOM Line Item that each BOM Line Item with the part number has the same list of alternate part numbers. |
Capture Materials activity
The Capture Materials activity in NPI allows you to capture inventory whose part number is a permitted alternate part number for the part number identified in the BOM. How the permitted alternate part numbers are identified varies depending on the Alternate IPN Strategy global setting value:
If the global setting is set to Maintain a Global Alternate IPN for Each Part Number, the permitted part numbers for a BOM line item include:
The revision of the part number identified in the BOM Line Item
Any other revisions of the part number identified in the BOM Line Item as allowed by the Revision Mode
The alternate part numbers listed in the global Part Library for the revisions of the part number identified in the BOM Line Item
Note icon false title Note:
If the global setting is set to Maintain a BOM Level Alternate IPN for Each Part Number, the permitted part numbers for a BOM line item include:
The revision of the part number identified in the BOM Line Item
Any other revisions of the part number identified in the BOM Line Item as allowed by the Revision Mode
The alternate part numbers listed for the BOM Line Item
Note
If the Revision Mode of a BOM Line Item is such that more than one revision of the specified part number is valid, the permitted alternate part numbers for the BOM Line Item include all of the alternate part numbers defined for all of the valid revisions of the part as specified in the BOM.
Example: Consider a BOM line item with a part number of A, revision 3. The Revision Mode is set to Use Specific or Newer. When determining the permitted part numbers, the system allows inventory of part A rev 3 plus inventory of any part number listed as an alternate of part A rev 3. The system also allows inventory of part A rev 4 (since this is a newer version of the part number defined in the BOM), plus inventory of any part number listed as an alternate of part A rev 4.
...
...
Note
...
See FactoryLogix global options for more information about changing global settings.
Sub-Assembly activity
The Sub-Assembly activity in NPI is similar in function to the Capture Materials activity; it allows the capture of inventory whose part number is a permitted alternate part number for the part number identified in the BOM. As with the Capture Materials activity, the location of the permitted alternate parts list is determined by the Alternate IPN Strategy global setting value.
...
...
Note
...
See FactoryLogix global options for more information about changing global settings.
BOM Processing
Additional functionality for alternate part numbers was added to the following BOM processing capabilities.
...
When loading a BOM from a file using the NPI client application, an operator is required to map columns in the BOM file to FactoryLogix field values (Map Row to Column Headers). The list of field values includes:
IPN & Description
Manufacturer Part Number & Manufacturer PN Description
Customer Part Number & Customer PN Description
Vendor Part Number & Vendor PN Description
Alternate IPN
Alternate IPN Description
Import a BOM from V7
...
The Import from V7 function includes a BOM import as part of this import of a process from a Fusion/v7 installation. When you import an alternate part number with the Import from V7 feature, the part description is included.
...
A global option was added to the list of BOM Management settings under the Option Type: BOM Publishing – Synchronization. The Alternate Part Number (Alt.IPN) Synchronization setting determines how imported alternate part information is used to update the global Part Library during BOM publishing. As with the IPN, CPN, MPN, and VPN Synchronization settings, this setting has the following values:
Never Override
Always Override
Update Missing Information Only (Default value)
Prompt User (Side-By-Side Comparison)
...
Note
...
See FactoryLogix global options for more information about changing global settings.
CAD-BOM Data Source
The results from the CAD-BOM data source includes alternate part numbers and the description for each alternate part number currently reported.
...
Two columns are available when you use the BOM Viewer Operator Interface gadget.
Alternate Part Number - When selected, displays any alternate part numbers for the BOM line item is displayed.
Alternate Part Number with Description -
WhenWhen selected, displays any alternate part numbers along with their corresponding part description (displayed in parentheses) for BOM line items.
If a BOM Line Item has more than one alternate part number, the values are concatenated, each separated by a comma.
...
A new column is available when you use the BOM Block Operator Interface gadget.
Alternate Part Number with Description - When selected, displays any alternate part numbers along with their corresponding part description (displayed in parentheses) for the BOM Line Item is displayed.
If a BOM Line Item has more than one alternate part number, the values are concatenated, each separated by a comma.
...
Two columns now available when you use the Visual Aid Tools tab in the NPI process Definition window to add a BOM Block:
Alternate Parts - Displays a BOM block column with alternate part numbers for BOM line items.
Alternate Parts With Description - Displays a BOM block column with alternate part numbers and their corresponding descriptions in parentheses for BOM line items
If a BOM line item has more than one alternate part number, the values are concatenated, each separated by a comma.
...