Name

The name of the step.

• To apply a step template to the step, select

• the Apply a Template 

• Image Added button, select a step template, then

• select OK.

• To save the step as a step template, select the

•  Save as Template 

• Image Added button, enter a name for the template, then

• select OK.

For details about creating and saving step templates, see Create a process, step, or operation template.

Operator Interface Template

The Operator Interface template to apply to the step.

See Operator Interface templates

 for more information.

Assigned Workstation

The assigned workstation where the step and activities will be performed by a shop floor operator.

See Create a factory and set up factory resources for more information.

Any Order Mode (Activities can be viewed in any order)

All the activities associated with the step may be viewed in any order.

Is Step Required?

The

step cannot

 be skipped by a shop floor operator.

Activities may be executed without starting a unit

Any activities associated with the step may be executed by a shop floor operator without first scanning or entering a UID to start the unit in production.

Frequency

• Frequency - The frequency with which activities associated with the step are displayed and performed. 

  • Every Item - Activities must be performed for every item. 

  • By Item Count - Displays activities for the step

• • every n number of scans. For example, when you select 3, activities will display for every third item, (item 1, item 4, item 7, item 10, and so on).

  • Batch Based - Displays activities using the specified condition:

    • (Select All) - Displays activities for the first and last items in the batch.

    • Start of Batch - Displays activities for the first item in the batch.

    • End of Batch - Displays activities for the last item in the batch.

  • Time Interval - Activities for the step must be performed using the specified conditions. For example, 1 product every 2 minutes for the current batch. 

  • At Certain Times of Day - Displays activities for the step at specific times during the day, for example when periodic maintenance is needed to keep a workstation or machine running smoothly.

  • By % of Total - Displays activities (even distribution) for the step each time the specified percentage of the total batch is reached. For example, a value of 10 percent in a 50-piece batch will display the specified step and activities every tenth assembly (10 percent of 50 is 5 over the course of 50 assemblies). This condition might be useful for periodic inspection of items in a batch.

  • Operation Session Based - Displays activities for the step each time an operator logs in to begin a new session.

Do you want to require credentials?

• Yes - The shop floor operator is prompted to supply appropriate credentials before completing the step.

• No - The shop floor operator isn't required to provide credentials before completing the step. 

Approval Process

• Yes - An approval will be required for the specified activities before the step can be completed.

  • Select an approval process from

• • the Approval Process

• •  drop-down.

  • Select the activities that the approval will be required for: First Activity, Last Activity,

• • or All Activities.

• No - The shop floor operator won't be required to obtain an approval before completing the step and its activities. 

Color Palette

The color palette to use for color coding parts. Select a color palette from the Palette Chooser drop-down.

• Select the Edit Color Palettes 

• Image Added button to open the color palette editor where you can specify custom colors for parts. 
  

• 
  

  Image Added

  
  

• To add, edit, or delete a color in the selected palette, select a color, then use the Add Color 

• Image Added, Edit Color 

• Image Added ,

• or Delete Color 

• Image Added button to make the desired changes.

• To change the name of a color palette, select

• the Change Palette Name

•  button to the right of

• the Palette Chooser

•  drop-down, enter a new name for the palette, then

• select OK.

Look Behind

The Look Behind

 feature is typically used in manual assembly operations where an assembler is shown the parts placed by the previous operator so that their work can be verified prior to the performing their own tasks. Parts placed by the previous operator are color-coded/highlighted using a pre-selected Look Behind Color.

• Use

• the Look Behind

•  drop-down to select the completed steps or activities the operator should review before performing this step.
  

• 
  

  Image Added

Look Behind Color

• Use

• the Look Behind Color

•  drop-down the specify the color to use for the selected Look Behind steps and activities.

Show Look Behind

• Use

• the Show Look Behind

•  drop-down to select the activities that will display the selected Look Behind Color:

  • First Activity - The selected Look Behind Color displays only for the first activity.

  • Last Activity - The selected Look Behind Color displays only for the last activity.

  • All Activities - The selected Look Behind Color displays for all activities.

Option Codes

Displays a list of available option codes.

• Use the Apply Option Codes

• Image Addedbutton to move selected option code(s) to the Assigned Option Codes column.

• Use the Remove Option Codes

• Image Added button on the right side of the window to move selected assigned option code(s) back to the Option Codes list.
  

• Image Added

  
  

Assigned Option Codes

Displays the option codes assigned to this step.

Use Logical Expression

Select the Use Logical Expression

Image Addedbutton on the right side of the dialog to define option codes for a step in the form of a logical expression (comprised of available option codes plus the logical operators: AND, OR, and NOT, and brackets to identify precedence).

Image Added