Status Check

Entry, Exit

Validates that the current unit has an acceptable status.

Acceptable status values are: Pass, Fail, or Scrap or you can select the (Select All) check box to include all acceptable statuses.

Batch Active Status Check

Entry, Exit

Validates that the status of the current batch is active (not on hold).

Role Check

Entry

Validates that the current user has a specific role (a failure reaction can force a pop-up to capture the sign-off user's name and password). Use the check boxes to select the desired roles in the Value(s) column or you can enable the (Select All) check box to select all available roles.

See Create and manage roles and permissions for details about user roles.

Defect Check

Entry, Exit

Validates that there are no open, fixed, closed, deleted, or false defect indictments. Under Condition Options, use the check boxes to select the desired Defect Status (Open, Fixed, Closed, False, Deleted or (Select All)) and other options for the Defect Check condition:

• Invalid Defect Status

• Validate Sub-Assemblies

• Only Consider Newly Created Defects

• Only Consider Defects Assigned to the Current Operation

• Inspection Codes to Consider

• Validate Maximum Repair Count

Symptom Check

Entry, Exit

Validates there are no open, fixed, closed, deleted, or false symptoms. Under Condition Options, use the check boxes to select the desired Invalid Symptom Status (Open, Fixed, Closed, False, Deleted or (Select All)) and other options for the Symptom Check condition:

• Validate Sub-Assemblies

• Only Consider Newly Created Symptoms

Evaluate Quality Standard

Exit

Validates that the operation quality standard is met. Under Condition Options, use the drop-downs to select the Quality Standard and the Result Code to be applied to this exit condition.

Minimum Dwell Time Check

Entry

Validates that the minimum amount of time specified has elapsed since completing the previous operation before entering this operation. Under Condition Options, you can specify the following conditions:

• Transaction First or Transaction Last time to utilize - Identifies whether the time value from the first or last WIP transaction at the specified WIP operation will be utilized. Valid values are First or Last.

• WIP Start or WIP Finish time value to utilize - Identifies whether the WIP Start or WIP Finish time value from the specified WIP operation will be utilized. Valid values are Start or Finish.

• WIP Operation from which to utilize time value - Identifies from which WIP operation the time value will be utilized. Select an operation from the drop-down.

• Comparison between resulted Dwell time and "Allowable Time" interval - Identifies the comparison that will be utilized in a calculation to determine the condition result. Valid values are:

  • Less than ("<")

  • Less than or equal to ("<=")

  • Greater than (">")

  • Greater than or equal to (>=")

This allows the condition to be implemented as a minimum or maximum dwell time check.

• Allowable Time since transaction - Specifies the time allowed since the last transaction. Select a time, then use the drop-down to select a unit of time (Second, Minute, Hour, Day, Week, or Year).

Maximum Dwell Time Check

Entry

Validates that the amount of time since the unit has completed the previous operation and entered the current operation has not exceeded the specified time. Under Condition Options, you can specify the following conditions:

• Transaction First or Transaction Last time to utilize - Identifies whether the time value from the first or last WIP transaction at the specified WIP operation will be utilized. Valid values are First or Last.

• WIP Start or WIP Finish time value to utilize - Identifies whether the WIP Start or WIP Finish time value from the specified WIP operation will be utilized. Valid values are Start or Finish.

• WIP Operation from which to utilize time value - Identifies from which WIP operation the time value will be utilized. Select an operation from the drop-down.

• Comparison between resulted Dwell time and "Allowable Time" interval - Identifies the comparison that will be utilized in a calculation to determine the condition result. Valid values are:

  • Less than ("<")

  • Less than or equal to ("<=")

  • Greater than (">")

  • Greater than or equal to (>=")

This allows the condition to be implemented as a minimum or maximum dwell time check.

• Allowable Time since transaction - Specifies the time allowed since the last transaction. Select a time, then use the drop-down to select a unit of time (Second, Minute, Hour, Day, Week, or Year).

Barcode Type Check

Entry

Verifies the unit's type matches one of the acceptable types. Use the Value(s) column to select the acceptable unit types (Panel, Carrier, or Product, or use the (Select All) check box to select all available types.

Recipe Name Check

Entry

Validates that the proper recipe is loaded on one or more workstations. Under Condition Options, use the New button to add a new Group or Workstation, then use the drop-downs to select workstations. Under Recipe Name, enter the name of the recipe to associate with a selected workstation. Select the Save button in the lower-right corner of the window to save your selections.

See Recipe management for more information about creating and saving process recipes.

Xout Checker Entry Condition

Entry, Reroute

After the first successful WIP start is executed, for all subsequent WIP starts the processing determines whether the assembly under construction is a panelized item. If the item is panelized, the last item to be successfully started is compared to the item undergoing the current start. If both items have the same X-Out configuration, nothing happens, however if their X-Out configurations differ, a message displays to notify the operator of the different X-Out configuration.

Evaluate Quality Standard

Exit

Validates that the currently specified quality standard has been met (defect threshold alarms, for example).

Under Condition Options, use the Quality Standard drop-down to select the desired quality standard, then use the Result Code drop-down to select the expected quality result code for that standard (Hold, Rework, or MRB for example).

See Define quality standards for more information about defining and managing quality standards.

Minimum Process Time Check

Exit

Validates that the current assembly has remained in the current operation for the minimum specified amount of time. Under Condition Options, use the drop-downs to specify the Value(s) and Interval for the Elapsed Time.

Maximum Process Time Check

Exit

Validates that the current assembly has not exceeded the specified process time. Under Condition Options, use the drop-downs to specify the Value(s) and Interval for the Elapsed Time.

Sub-Assembly Check

Entry, Exit

Validates that there are no missing or incomplete assemblies. Under Condition Options, use the Value(s) drop-down to select the options for this condition: Missing, Incomplete, or (Select All).

Operation Status Action Processor

Entry, Exit

Performs a status check on a specific operation in the process flow. The condition allows the selection of the specific operation within the process flow where the unit must have finished with the desired status. (If more than one operation needs to be validated, you can configure multiple instances of this entry condition.)

Operation allows you to select the name of the operation for which the WIP records are validated for the correct status. All operations in the current process flow (including out-of-route operations) are listed. All Previous Operations allows the operator to validate the complete process flow up to the current operation.

The Considered WIP Records setting defines which WIP record (if more than one exists) will be considered to make the determination:

• Last Record - The last WIP record.

• All Records - The entry condition will return a negative result if one of the existing WIP records for the configured operation has a status value other than the configured Acceptable Statuses.

• (Select All) - Includes All Records and the Last Record.

Acceptable Statuses are: Passed, Failed, or Scrapped or you can enable the (Select All) check box to include all acceptable statuses. The selections represent WIP statuses that will cause the condition to return a positive outcome.

The Operation Status Action Processor entry condition validates the currently processed barcode by verifying that it has finished the configured manual Operation with one of the configured Acceptable Statuses—either overall or during the last execution of the operation, depending on the Considered WIP Records setting.

• If all configured restrictions apply, the entry condition will return a positive result.

• If no WIP record is found for the unit and operation, a negative result will be returned, the unit will not be allowed for processing at the current operation.

xLink adapters ignore entry conditions since they are designed to only collect data for units already processed and have no influence on the actual starting of a barcode.

Change Product Action Processor 

Entry, Reroute

This action moves units to another production batch.

When changing a product, you can specify the following options for this action:

• Change Barcodes to Batch

• Allowed Source Assembly Property

• Change Assembly Revision Property

• Change Assembly Property

• Enforce Barcode Template Property

• Validate Source Assembly Property

• Allow All assembly Revisions

• Validate Source Assembly Route Property

Defect Status Update

Entry, Exit, Reroute

When this action is executed for a unit, any defects with the same status as the Change Status From value that was created at an operation identified by the Defects Created At option will have their status updated to the Change Status To value.

Fire Alarm

Exit, Reroute

Forces the specified alarm reaction template to be fired at the specified frequency. Under Condition Options, use the Value(s) drop-down to select the desired alarm reaction template.

See Alarm triggers, reactions, and alarm reaction templates for more information about alarm reaction templates.

Unload Carrier

Exit, Reroute

Unload carrier items at this point.

De-panelize Assemblies

Exit, Reroute

Upon finishing the current assembly, the unit will be made single or de-panelized (if panelized).

Batch Quantity Reached Alarm

Exit, Reroute

Fires the specified alarm reaction template once the batch quantity has been reached at this operation.

See Alarm triggers, reactions, and alarm reaction templates for more information about alarm reaction templates.

Generate Report

Exit, Reroute

Forces the selected report to be generated. use the Value(s) drop-down to select the report to generate.

Print Label

Exit, Reroute

Causes a product label to be generated using the specified label template.

Post-Fail Passes

Exit, Reroute

Ensures that a unit which has been found defective then has a number of consecutive passed statuses before it can move forward to the next operation.

Change Batch Status

Exit, Reroute

Change the status of the batch to the selected value (particularly useful for closing completed batches automatically).

A completed batch is a batch that has satisfied its quantity requirements. A closed batch is typically done by the user. The batch may not have met its quantity, but the user wanted it closed.

Send Material to Stock Location

Exit, Reroute

Sends material to the default assigned stock location. If more than one stock location is assigned, the system sends the material to the location with the least material.

Move Product to a New Batch

Exit, Reroute

Moves units to another production batch based on the selected target process revision and target operation.

Trigger Integration Service Exit Action

Exit, Reroute

Records an entry in an EventTriggers database table for each WIP record with a WIP Status of Passed.

Export Files

Exit, Reroute

Exports all files collected during production using the Attach File activity and alarm reactions that have been defined so that "everyone can access".

Export Tracking History

Exit, Reroute

Exports all tracking history for a UID and all of its sub-assemblies.

This action should only be used on the uppermost assembly being built.

Attach File Exit Action

Exit, Reroute

Exports all tracking history for a UID and all of its sub-assemblies. 

This action should only be used on the uppermost assembly being built.

SemiDepanelization

Exit, Reroute

Panelizes panels with more than one image into at least two panels. For example, if there are four images/circuits that need to be panelized in two panels, specify "[1,2]#[3,4]".

• Values in square brackets [ ] represent the image/circuit numbers that belong to the divided panel which contains the number in the order it appears in input.

• The hash tag symbol (#) divides each panelized new panel.

Depanelize Defective Circuit

Exit, Reroute

Separates a defective unit from the panel and routes the panel to the next in-route operation while routing only the individual unit to an out-of-route operation.

Execute Transport Order

Exit, Reroute

Sends a product to a specified stock resource using a transport order.

• Notification Email Address - The email address to send the transport order notification to.

• Reason Code - The reason code to use for the transport order.

• Source Stock Resource - The source stock for the transport order, for example Main Stock Area 1.

• Destination Factory Resource - The destination factory resource for the transport order, for example a specific area, line, or workstation.

Set Lot Status

Exit, Reroute

This action sets the status of the lot based on the Lot Status setting (Passed or Failed) and allows the creation of a non-conformance. You can select a Non-Conformance Profile and a related Scrap Reason Code from the drop-downs under Condition Options.

Every Item

Each assembly scanned into this operation will have the selected condition processed.

By Item Count

Processes the condition upon every n assemblies.

Batch Based

Processes the selected condition one time at the beginning of the batch, at the end of the batch, or both at the start and the end.

Time Based

Processes the selected condition n times per half-hour or hour.

By % of Total

Processes the selected condition at regular intervals based on the specified percentage of the total batch quantity.

For example, a value of 10 percent in a 50-piece batch will present the specified step every tenth assembly (10 percent of 50 is 5 over the course of 50 assemblies).

Warning

Operators may proceed despite the invalid condition but receive a warning in a message box.

Error (Prevent Action)

An error dialog is presented to operators and the operation is not allowed to continue.

Re-Route

A re-route pathway forces the assembly to be routed to an alternate operation (or series of operations) for further processing. You select the appropriate re-route flow from the drop-down.