Delete an assembly

Log into the FactoryLogix Office client application, then select Libraries > Assembly Library.

Use the Search for field to locate the assembly, select Show Only Assemblies, then select the binoculars  button to start the search. (Use the desired search filters to help find the assembly quickly by part number type.)

Open

Select the assembly from the list, then select the Delete button at the top of the window.

If there are process revisions associated with the assembly, you will see the following error message (otherwise, the assembly is deleted and you're finished).

Open

Select OK, then select Cancel to return to the Part Library window.

To delete the process revisions associated with the assembly, go to FactoryLogix Office > Process Engineering > Define Processes > Open Process.

Use the Search field to locate the process revision.

Select the process revision, then select the Delete button on the toolbar.

When the confirmation dialog displays, select Yes to confirm that you want to delete the process revision.

The process revision is deleted.

If there are batches associated with the selected process revision that you're deleting, you will see this error message:

Select OK. 

To remove the batches associated with the process revision, navigate to FactoryLogix Office > Logistics > Batch Management.

Locate and select the batch associated with the process revision you want to delete.

Select the batch, then select the Remove Batch  button at the top of the window.

Select Yes to confirm the deletion.

Repeat Steps 1–3 to delete the assembly.