- Created by Adriane Hunt on May 07, 2024
You are viewing an old version of this page. View the current version.
Compare with Current View Page History
Version 1 Next »
The Action Plans section of the Non-Conformance Profiles window is where you specify the action plans available for a non-conformance profile. When you make a disposition decision, you use the Accessibility drop-down in each action plan type or root cause analysis to specify what is Required, Permitted, and Not Permitted to address a non-conformance.
The color of each action plan type has significance:
- Green indicates required
- Yellow indicates permitted
- Gray indicates not permitted
Important!
The fourth option in the Accessibility drop-down is Required By Disposition. When you select this option, a correction action plan will be required to resolve a non-conformance.
The following table describes the options available in the Action Plans section of the Non-Conformance Profiles window.
Option | Description |
---|---|
Repair/Correction Action Plan |
|
Containment Action Plan(s) |
|
Root Cause Analysis |
|
Corrective Action Plan(s) |
|
Preventive Action Plan(s) |
|
- Log into the NPI client application.
- Select Templates and Standards > Define Quality Standards, then select the Non-Conformance Profiles tab.
- On the right side of the Non-Conformance Profiles window, select the arrow next to Action Plans to expand the selections for action plans and root cause analysis.
- Determine one or more action plans and/or root cause analysis for this profile.
- Select the desired options for the action plan and/or root cause analysis (see the previous table for details about the options).
- Select Save to save your selections for the non-conformance profile.
- No labels