The following table lists the default port settings used by the FactoryLogix system.
Port
Protocol
Description
Where used
25
SMTP
SMTP Server
The default port used by the SMTP server when sending emails in FactoryLogix.
You can change this port in NPI (Settings > Global Options > General > Option Type: E-Mail).
808
TCP
FactoryLogix License Server
The default port used by the FactoryLogix License Server (the computer that hosts your license information).
This port is used by clients to pull licensing information/validation from the FactoryLogix Application Service.
1433
TCP
Microsoft SQL Server
The port used by your SQL Server.
1883
TCP
inForce 2.0
This port is used for MQTT communications used by inForce 2.0
3702
UDP
FactoryLogix Application Service
The default port used by clients to leverage Windows Network Discovery and find/discover available Application Services to connect to. (It’s not needed but recommended—if it’s not configured, you must enter the server connection settings manually.)
6060
TCP
FactoryLogix Real Time Analysis Service
The default port used for communication between the FactoryLogix Real-Time Server and clients.
This port needs to be open between the server running the Real Time Analysis Service and any clients that connect to it so clients can access the data pushed by the service (NPI, Production, and iMonitor dashboards, for example).
You can change this port in NPI (Settings > Global Options > Real-Time Analysis > Option Type: Real-Time Analysis - Settings > Server Port).
6062
TCP
FactoryLogix inSite Mobile App & Mobile Logistics
The default port used by the server running the FactoryLogix Application Service for Using Mobile Logistics and inSite clients.
6063
TCP
FactoryLogix xTend API Service
The default port used for API calls to/from customer applications and for the FactoryLogix xTend API Service.
6064
TCP
FactoryLogix Archive Service
The default port for the Archive Server (the computer that hosts the FactoryLogix Archive Service).
7000
TCP
inForce 1.0 and 2.0
This port needs to be open between inForce 1.0 and the xLink Server
8000
TCP
inForce 1.0 and 2.0
This port needs to be open between inForce 1.0 and the xLink Server
8888
UDP
inForce 2.0
This port is used for the "discovery" of new inForce 2.0 units. It utilizes a UDP datagram.
8393
TCP
V7 License Server
The default port used by the V7 License Server (the computer that hosts your license information).
This port is used by clients to pull licensing information/validation from the V7 Application Service.