/
(de) Ausgewählte Unterbaugruppen und Bauteile farblich hervorheben

(de) Ausgewählte Unterbaugruppen und Bauteile farblich hervorheben

To draw attention to specific assembly parts in a 3D CAD image, you can color selected sub-assemblies or individual parts.

 

Assembly before applying color



  1. In the Process Definition window, select the sub-assembly or part you want to apply a color to. (Ctrl+click to select multiple parts.)

  2. Right-click the part, then select Set Color from the menu. (If you selected multiple parts, right-click any selected part.)


    3D CAD right-click menu




  3. Click a blank area of the window to view the applied color.


    Set Color command applied




  4. To modify the color, right-click a colored part, then select Modify Color from the menu to display the Color Picker.

  5. Use the Color Picker slider control and the cursor to select a new color, select Apply, then select OK to confirm your color choice.



    Use the Color Picket to select a new color




  6. You can now color additional sub-assemblies or parts using the new color. If desired, you can use the Modify Color command at any time to select another color.

  7. To remove color from a selected part, right-click the part, then select Unset Color from the menu.

    The following illustration shows an assembly using two colors to draw attention to specific areas of the assembly.


    Assembly with multiple colors applied to parts

 

Copyright © 2025 Aegis Industrial Software Corporation. All Rights Reserved.